DTM Epoxy Primer Gallon KIT GRAY 1:1 MIX Platinum 2K Epoxy w/Hardener

Primary Color: Gray

Brand: Platinum

Type: Epoxy Primer

Warranty: No Warranty

Manufacturer Color Name: Gray Epoxy Primer

Color: Gray

Items Included: Activator/Hardener,Primer

Manufacturer Part Number: PBEP-1

Bundled Kit Components: Activator/Hardener

Country of Origin: United States

Platinum Epoxy DTM 2K Epoxy Primer Gallon KIT - GRAY (1:1 Mix Ratio with Hardener Included)

Professional-grade Platinum Epoxy DTM 2K Epoxy Primer in Gray – now available in a convenient gallon kit that includes both the primer base and the hardener for easy activation. This high-performance, two-component (2K) direct-to-metal (DTM) epoxy primer delivers excellent corrosion resistance, superior adhesion, and outstanding protection against rust and environmental damage.

Key Features:

• Direct-to-Metal (DTM) application – Bonds exceptionally well to bare metal (including steel), aluminum, fiberglass, body filler, galvanized surfaces, and properly prepared substrates – no etch primer required in most cases.
• 1:1 mix ratio by volume – Simple and forgiving mix (equal parts primer to hardener), making it ideal for both professional shops and DIY enthusiasts.
• Anti-corrosive formula – Provides maximum defense against rust, with excellent salt spray resistance and long-term durability.
• High-build properties – Fills minor surface imperfections while offering great feather-edging and sanding characteristics.
• Fast-drying and easy to work with – Excellent topcoat holdout for a wide range of automotive topcoats (urethane, basecoat/clearcoat, etc.).
• Lead and chromate-free for safer use.
• Available in Gray, Black, and White – Choose the color that best suits your project (Gray is ideal for most applications as it hides imperfections well).
• Also available in quart size kits in Gray, Black, and White – perfect for smaller jobs or touch-ups.

Technical Information:

• Mix Ratio: 1:1 by volume (1 part primer base : 1 part hardener).
• Pot Life: Approximately 4-6 hours at 70-75°F (21-24°C) once mixed – mix only what you need to avoid waste (pot life shortens in higher temperatures).
• VOC Compliant: Low-VOC formula suitable for various regulations.
• Coverage: Approximately 200-300 sq ft per gallon kit (depending on application thickness, surface porosity, and number of coats; typical dry film thickness 1-2 mils per coat).
• Dry Times (at 75°F / 24°C):
  • Flash between coats: 10-15 minutes.
  • Dry to touch: 30-60 minutes.
  • Ready for sanding/topcoating: Overnight air dry recommended for best results (or force dry if needed).
  • Recoat window: Topcoat within 24 hours for best adhesion; if longer, scuff sand lightly.
• Application Methods: Spray (recommended for best results), brush, or roller possible for small areas/DIY.

Instructions for Use (DIY-Friendly):

1. Surface Preparation: Thoroughly clean the surface to remove oil, grease, wax, and contaminants. Remove all rust, scale, or loose paint. Sand bare metal (80-180 grit for adhesion), aluminum, fiberglass, or body filler (appropriate grit for smooth profile), or scuff existing finishes (220-400 grit). Wipe down with a wax and grease remover.
2. Mixing: Stir the primer base thoroughly. Measure equal parts (1:1) of primer and hardener by volume. Mix well for 1-2 minutes until uniform. Allow a short induction time if specified (typically 5-10 minutes for epoxies). Do not thin unless needed for spraying (use compatible epoxy reducer sparingly).
3. Application:
   • Apply 1-2 medium wet coats, allowing 10-15 minutes flash time between coats.
   • Use HVLP or conventional spray gun (1.4-1.8 mm tip recommended, 25-35 PSI).
   • For sealing: Apply a single lighter coat.
   • Maintain wet edges to avoid dry spray.
4. Drying & Sanding: Allow to air dry overnight for full cure and best sanding (P400-P600 grit wet or dry). For faster results, force dry per equipment guidelines.
5. Topcoating: Compatible with most 1K/2K automotive paints. Sand if recoat exceeds 24-72 hours.
6. Cleanup: Clean equipment immediately with appropriate solvent (acetone or epoxy reducer). Dispose of waste properly.

Safety Notes: Wear appropriate PPE (respirator, gloves, eye protection). Use in well-ventilated area. Follow all local regulations for hazardous materials.

This premium Platinum DTM Epoxy Primer is trusted for automotive restorations (perfect for bare metal, aluminum panels, fiberglass bodies, or areas with body filler repairs), industrial applications, and DIY projects. Get professional results with easy application!

Available in Gallon Kit (Gray) – also check my listings for Black, White, and Quart sizes.